HP Dc7100 Desktop Management Guide - Page 26

Desktop Management Guide The following table and sections refer to managing security features of the computer locally through the Computer Setup (F10) Utilities. Security Features Overview Option Description Setup Password Allows you to set and enable setup (administrator) password. ✎ If the setup password is set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. See the Troubleshooting Guide on the Documentation CD for more information. Power-On Password Allows you to set and enable power-on password. See the Troubleshooting Guide on the Documentation CD for more information. Password Options (This selection will appear only if a power-on password is set.) Allows you to specify whether the password is required for warm boot (CTRL+ALT+DEL). See the Desktop Management Guide on the Documentation CD for more information. Pre-Boot Authorization Allows you to enable/disable the Smart Card to be used in place of the Power-On Password. Smart Cover Allows you to: • Enable/disable the Cover Lock. • Enable/disable the Cover Removal Sensor. ✎ Notify User alerts the user that the sensor has detected that the cover has been removed. Setup Password requires that the setup password be entered to boot the computer if the sensor detects that the cover has been removed. This feature is supported on select models only. See the Desktop Management Guide on the Documentation CD for more information. ✎ For more information about Computer Setup, see the Computer Setup (F10) Utility Guide on the Documentation CD. Support for security features may vary depending on the specific computer configuration. 22 www.hp.com Desktop Management Guide