HP Designjet L26100 HP Designjet L26500/L26100 Printer Series - Introductory - Page 7
highlight, select, Item1, Item2, Item3, Numeric error messages
View all HP Designjet L26100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
8. Back key: To go to the previous step in a procedure or interaction. To go to the upper level, or leave the option in the menu, or when given an option. 9. Cancel key: To cancel a procedure or interaction. 10. Reset key: To restart the printer (as if it were switched off and switched on again). You will need an implement with a narrow tip to operate this key. 11. Move substrate key: To move the loaded substrate forwards or backwards. While the printer is printing, it can be used to fine-tune the substrate advance on the fly. To highlight an item in the front-panel display, press the Up or Down key until the item is highlighted. To select an item in the front-panel display, first highlight it and then press the OK key. When this guide shows a series of front-panel display items like this: Item1 > Item2 > Item3, it means that you should select Item1, then select Item2, then select Item3. Information about specific uses of the front panel can be found throughout this guide. Front-panel error messages Under certain circumstances, a front-panel error message appears. Follow the advice in the Recommendation column to resolve the error. For details of maintenance operations, see the Maintenance and Troubleshooting Guide. Table 1 Numeric error messages Error code Recommendation 15.01:00, 16.01:00 The printer is unable to warm up within a preset time limit. Check that the ambient temperature and input voltage are within printer specifications. 15.02:00, 16.02:00 The printer is unable to cool down within a preset time limit. Check that the ambient temperature is within printer specifications. Check that all fans are working and unblocked. 15.03:00, 16.03:00 Excessive heat in the drying module. Check that all fans are working and unblocked. 15.04:00, 16.04:00 Insufficient heat in the drying module. Check that the ambient temperature is within printer specifications. 15.05:00, 16.05:00 Infrared sensor error. Check that all fans are working and unblocked. ENWW Front-panel error messages 5