HP Designjet L28500 HP Designjet L28500 Printer Series - Site preparation guid - Page 6
Site preparation requirements, Physical space requirements, Unloading route, Assembly area
View all HP Designjet L28500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 Site preparation requirements Physical space requirements Unloading route The route between the unloading area of the printer and the installation site, including any corridors and doorways through which the printer must be transported, is important and must be checked before the arrival of the printer. This pathway must be clear when the printer arrives. Table 2-1 Printer physical specifications Printer Length 3581 mm (141 in) Width 730 mm (28.7 in) Height 1377 mm (54.2 in) Weight 380 kg (837 lb) With packaging 3850 mm (151.6 in) 1100 mm (43.3 in) 1675 mm (65.9 in) 645 kg (1422 lb) Doorways: minimum width 1.54 m (60.6 in) × minimum height 2.1 m (82.7 in) required. Assembly area The space required for assembly is illustrated below: 1 m (39 in) on all sides of the box, except on the side where the printer will be wheeled out, where a space of 6 m (20 ft) is required. Most of the installation process can be done by one person, but two people are required to perform certain tasks. 2 Chapter 2 Site preparation requirements ENWW