HP Dv7-1243cl HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 66
Webcam/microphone module, Flex the inside edges of the top edge
View all HP Dv7-1243cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Webcam/microphone module NOTE: This section applies only to computer models equipped with BrightView display assemblies. NOTE: If it has been determined that the webcam/microphone module is the component that must be replaced to complete the computer repair, the display assembly does not have to be removed. Follow the procedures in this section to replace the webcam/microphone module. For information on replacing the display assembly and other display assembly internal components, see Display assembly on page 76. Description Webcam/microphone module Spare part number 480446-001 Before removing the webcam/microphone module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 54). Remove the webcam/microphone module: 1. Turn the computer display-side up, with the front toward you. 2. Open the computer as far as possible. 3. Flex the inside edges of the top edge (1) and the left and right upper corners (2) of the display bezel until the bezel disengages from the display enclosure. 4. Release the display bezel top edge (3) from the display enclosure. 56 Chapter 4 Removal and replacement procedures