HP Dv7-1243cl HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 69
Hard drive, Lift the rear edge of the accessory cover
View all HP Dv7-1243cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 320-GB, 5400-rpm 250-GB, 5400-rpm 160-GB, 7200-rpm 160-GB, 5400-rpm 120-GB, 5400-rpm Hard Drive Hardware Kit (includes bracket and screws) Spare part number 480456-001 480455-001 480454-001 480453-001 480452-001 480457-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 54). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the six Phillips PM2.5×6.0 captive screws (1) that secure the accessory cover to the computer. 3. Lift the rear edge of the accessory cover (2), swing it up and forward, and then remove the cover (3). The accessory cover is included in the Plastics Kit, spare part number 480467-001. 4. Remove the three Phillips PM2.5×4.0 screws (1) that secure each hard drive to the computer. Component replacement procedures 59