HP EliteBook 735 Maintenance and Service Guide - Page 61
Power button board, Remove the Phillips M2.0 × 3.0 screw
View all HP EliteBook 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Power button board Table 6-5 Power button board description and part number Description Power button board assembly Power button board cable Spare part number L60628-001 L60602-001 (Cable Kit) Before removing the power button board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Disconnect the battery cable from the system board (see Battery on page 45). Remove the power button board: NOTE: The power button board sits under the right display hinge. You do not have to remove the display to remove the board, but you do have to rotate the right display hinge upward to gain access. 1. Remove the two Phillips M2.5 × 4.0 screws (1) that secure the right display hinge, and then rotate the hinge upward from on top of the power button board (2). 2. Disconnect the cable from the ZIF connector on the power button board (3). 3. Remove the Phillips M2.0 × 3.0 screw (4) that secures the power button board to the computer. 4. Remove the power button board from the computer (5). Reverse this procedure to install the power button board. Component replacement procedures 51