HP EliteBook 735 Maintenance and Service Guide - Page 76

Display assembly, Remove the cables from the clips built into the computer

Get HP EliteBook 735 PDF manuals and user guides View all HP EliteBook 735 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Display assembly Before removing the display assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Disconnect the battery cable from the system board (see Battery on page 45). Remove the display assembly: 1. Disconnect the antenna cables from the WWAN module (1) and the WLAN module (2). 2. Disconnect the display cable (3) and the camera cable (3) from the system board. 3. Remove the cables from the clips built into the computer (4). 4. With the computer upside down, open the display, and then place the computer on a table with the display positioned off the edge of the table (1). 5. Remove the five Phillips M2.5 × 4.0 screws (2) from the display hinges. 66 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Display assembly
Before removing the display assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
45
).
Remove the display assembly:
1.
Disconnect the antenna cables from the WWAN module
(1)
and the WLAN module
(2)
.
2.
Disconnect the display cable
(3)
and the camera cable
(3)
from the system board.
3.
Remove the cables from the clips built into the computer
(4)
.
4.
With the computer upside down, open the display, and then place the computer on a table with the
display positioned
off
the edge of the table
(1)
.
5.
Remove the
five
Phillips M2.5 × 4.0 screws
(2)
from the display hinges.
66
Chapter 6
Removal and replacement procedures for authorized service provider parts