HP EliteBook 735 Maintenance and Service Guide - Page 63
Touchpad, Disconnect the card reader cable from the ZIF connector on the touchpad
View all HP EliteBook 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Touchpad Table 6-7 Touchpad and cable descriptions and part numbers Description Touchpad without NFC antenna Touchpad with NFC antenna Touchpad cable Spare part number L60597-001 L60598-001 L60602-001 (Cable Kit) Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 45). Remove the touchpad: 1. Disconnect the card reader cable from the ZIF connector on the touchpad (1). 2. Disconnect the touchpad button board cable from the ZIF connector on the touchpad (2). 3. Disconnect the NFC module cable from the ZIF connector on the NFC board (3). 4. Remove the four Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the computer. 5. Remove the touchpad from the computer (5). Reverse this procedure to install the touchpad. Component replacement procedures 53