HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 Onboard Administra - Page 192
Event notifications, Enclosure event notifications, Command line event notifications
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
31 Event notifications Enclosure event notifications Enclosure events produce screen messages with the SHOW DISPLAY EVENTS option enabled. If you are directly affected by an event, then a message displays whether the SHOW DISPLAY EVENTS option is enabled or disabled. Event messages include the device affected, the device name, and the date and time of the event. Some examples of event messages are: • The enclosure is in a degraded state. • Blade X has experienced a failure. • The temperature on blade X has exceeded the failed threshold. • Fan X has experienced a failure. • The power supplies are no longer redundant. • Power supply X is in a degraded state. • The enclosure temperature has exceeded the degraded threshold. Command line event notifications When the SET DISPLAY EVENTS option is turned ON, the terminal interface displays error, warning, and status messages, depending on the behavior of the enclosure and its components. The syntax for these messages are: • : Description of error • : Description of warning • : Description of status Causes of the error, warning, or status events that display are listed in the following table. Event Bay Event Blade Inserted Blade Thermal Status Changed Blade Removed Blade Port Map Info DVD Inserted DVD Removed Enclosure Status Change Enclosure Name Change Fan Status Change Fan Inserted Fan Removed GPSM Inserted GPSM Removed Cause A bay was assigned or unassigned from a group. A blade was inserted into the enclosure. The thermal status of a blade changed A blade was removed from the enclosure. The port mapping information of a blade was updated. A DVD module was inserted in the monarch enclosure. A DVD module was removed from the monarch enclosure. A change in status has occurred because of a change in the state of one or more hardware components or server readings. The name of an enclosure was changed. The status of a fan has changed. A fan has been inserted. A fan has been removed. A GPSM has been inserted. A GPSM has been removed. 192 Event notifications