HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 Onboard Administra - Page 51
Enclosure Bay IP Addressing commands, ADD EBIPA, DISABLE EBIPA
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
10 Enclosure Bay IP Addressing commands ADD EBIPA • Command: ADD EBIPA { BLADE | INTERCONNECT } DNS ] NOTE: SERVER is a valid alias for BLADE. • Description: Adds a DNS server IP address to the list of DNS servers for either BLADE bays or INTERCONNECT bays • Access Level/Bay level: Administrator, Operator • Restrictions: ◦ A maximum of three DNS servers can be added for EBIPA. ◦ The must be in the form where each ### ranges from 0 to 255. DISABLE EBIPA CAUTION: This command cycles power to the interconnect and causes a loss of connectivity. • Command: DISABLE EBIPA {BLADE|INTERCONNECT} [ALL | ]] • Description: Disables the ability of the Onboard Administrator to give devices in the bays IP addresses using DHCP. If no bay numbers are specified, then EBIPA is disabled for all bays. Devices in bays receive IP addresses from an external server. This causes a reset of the iLO, which causes it to attempt to get an IP address from an external DHCP server. The interconnect is power-cycled. • Access level/Bay level: Administrator, Operator • Restrictions: None ENABLE EBIPA CAUTION: This command cycles power to the interconnect and causes a loss of connectivity. • Command: ENABLE EBIPA {BLADE|INTERCONNECT} [ALL | ]] ADD EBIPA 51