Home » HP Manuals » Servers » HP Integrity Superdome 2 16-socket » Manual Viewer

HP Integrity Superdome 2 16-socket LIFT-O-FLEX® 17000 SP 400 Manual - Page 21

Lifter Check List

View all HP Integrity Superdome 2 16-socket manuals

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Lift-O-Flex 17000 SP 400 Manual 10 1 Charger Plug 11 1 Base 12 1 Insert 13 1 Cable Kit 14 2 Screw 17327 RonI Supplied RonI Supplied 17126 4.4.10 Lifter Check List During assembly of the LIFT-O-FLEX 17000 SP 400 components are required to be inspected prior to using the lifter. This is to ensure that the lifter will operate safely and ergonomically. Casters swivel and rotate properly Intermediate section assembled to legs with the bolts provided and are secure. Brake rod mounted to ensure proper operation. Wiring is not pinched, loose or frayed. Lift mast is seated properly to the motor coupling in intermediate section after assembly. Quick release handles are in proper working order. Plugs for motor power and remote controller are mounted properly in the proper connector. Handlebar is at correct height. Forks mounted. Remote controller operates up/down functions properly. Batteries charged. Page 20 Rev July 01

Section	Page
Lift-O-Flex™ 17000 SP 400 Manual	2
TABLE OF CONTENTS	2
Lift-O-Flex 17000 SP 400 Manual	3
LIFT-O-FLEX 17000 SP 400	3
LIFT-O-FLEX®	3
NOTE: It is important that you read and fully understand this manual before using your Lift-O- Flex Lifter. If you have any questions contact your distributor or the manufacturer.	3
GENERAL DATA	3
GOOD WORKING ENVIRONMENT	3
FLEXIBLE	3
Lift-O-Flex 17000 SP 400 Manual	4
Abuse and/or careless operation will void the warranty.	4
Lift-O-Flex 17000 SP 400 Manual	5
Assembly instructions	5
Lift-O-Flex 17000 SP 400 Manual	6
Operating instructions	8
Note: Due to the worldwide disbursement of lifters, one of three (3) types of chargers will be delivered with each lifter in order to meet the various power requirements utilized.	8
North America: 17136-110VAC/18VDC with standard US plug. Europe: 17134- 230VAC/ 18VDC with 2 prong European plug. Pacific Rim: 17082- 100- 240VAC/ 18VDC with standard US Plug.	8
The European charger may require a plug adapter to fit countries wall socket. The Pacific Rim charger will require a pigtail adapter from standard US plugto plug to fit countries wall socket.	8
Adapter plugs to fit chargers for wall sockets are the responsibility of Hewlett-Packard.	8
Lift-O-Flex 17000 SP 400 Manual	9
Important! The maximum lift capacity is limited to 400lb. The lifter is not to be used for personnel transportation.	9
The end-effector should always to be lowered to the lowest possible position before moving the	9
lifter.	9
Lift-O-Flex 17000 SP 400 Manual	10
RONI, LLC	10
The lifter does not run at all.	10
The end-effector cannot be lowered or raised but the motor runs.	10
The end-effector moves at a slower speed than normal	10
When lifting there is a strange sound and/ or the lifter operates differently than usual.	10
Lift-O-Flex 17000 SP 400 Manual	11
Do not use a high-pressure hose. It	11
could damage both the electronics as well as the chassis.	11
The batteries cannot be \	11
Every 6 month maintenance	11
Lift-O-Flex 17000 SP 400 Manual	12
Enclosures	12