HP Integrity Superdome 2 16-socket LIFT-O-FLEX® 17000 SP 400 Manual - Page 6
Rev July 01
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Bolted Intermediate Section Lift-O-Flex 17000 SP 400 Manual Lift Motor Intermediate Section-Lock in Place with Quick Disconnect Pin Located on Bolted Intermediate Section Bracket. 3. Pick up the lift mast and carefully insert the mast onto the mounting slide. (A mounting slot is provided full length on the rear of the mast). Slide the mast onto the mounting slide until it mates with coupling located at the bottom of the intermediate section. (If the coupling does not seat properly, lift the mast up approximately 2" from the intermediate section, lift up on the endeffector mounting yoke (this will turn the coupling on the lift mast) and push the mast into position). An indicator line is provided on each mast that matches the top of the lift mast mounting yoke. This must be aligned for proper operation of the lifter. 4. Tighten the handle on the back of the mounting yoke. Page 5 Rev July 01