HP Integrity Superdome 2 8/16 HP Integrity Superdome 2 Onboard Administrator C - Page 162

The test camnet all command will execute the global CAMNet test after first checking that there are no partitions active. • Access level/Bay level: All • Restrictions: ◦ The value must be formatted as either an 8-byte hexadecimal integer, or a long or medium hardware resource path string (short form strings are not supported). ◦ Must be in the Health Repository viewer. TEST FABRIC • Command: TEST FABRIC • Description: Performs an active test of the complex interconnect fabric, the CAMNet manageability fabric, the global clock distribution, and the OA links. This test detects problems resulting from malfunctioning hardware, missing or broken cables, or from incorrect cabling. Any test failures results in a series of hardware indictments referencing specific hardware elements encountering problems. To view the generated indictments, see "SHOW INDICT" (page 159). NOTE: TEST FABRIC cannot be run on an active complex. You must shut down all partitions before using the TEST FABRIC command. • Access level/Bay level: All • Restrictions: Must be in the Health Repository viewer. TEST CLOCKS • Command: TEST CLOCKS • Description: ◦ The command verifies the following: Global clock distribution to ensure that GPSM clock control registers are set appropriately for the complex type ◦ If there are no partitions active, the test will also actively manipulate clock generators to ensure that the cabling is correct on multi-enclosure systems. ◦ This test is also run as part of the test fabric command, which requires that no partitions are active. ◦ All clock sources are working ◦ Each blade is receiving both complex global clock signals • Access level/Bay level: All 162 Health Repository commands