HP Integrity Superdome 2 8-socket HP Integrity Superdome 2 Onboard Administrat - Page 55
Enclosure network configuration commands, ADD OA DNS, ADD SNMP TRAPRECEIVER, ADD SSHKEY
View all HP Integrity Superdome 2 8-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
11 Enclosure network configuration commands ADD OA DNS • Command: ADD OA DNS [] • Description: Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured to use a static IP address. If a bay number is not specified, the command defaults to the active Onboard Administrator. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: A maximum of two DNS servers can be added. The must be in the form where each ### ranges from 0 to 255. ADD SNMP TRAPRECEIVER • Command: ADD SNMP TRAPRECEIVER [""] • Description: Adds an IP address to receive SNMP traps. Traps are directed to the SNMP default port 162. The default trap community string is public. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: ◦ A maximum of eight IP addresses can be added to receive SNMP traps. ◦ Only v1 traps are supported. ◦ The must be in the form where each ### ranges from 0 to 255. ADD SSHKEY • Command: ADD SSHKEY • Description: Adds an SSH key or keys to the Administrator local account. Multiple SSHKEYs can be concatenated in the string. 1. Locate a string that does not appear in the key, to use as the end marker. 2. Paste in the SSHKEY string. 3. Finish the command with the end marker. Failure to give a proper end marker before and after the certificate might cause the interface to wait for the appropriate end marker indefinitely. ADD OA DNS 55