HP Integrity Superdome 2 8-socket HP Integrity Superdome 2 Onboard Administrat - Page 67
Set Snmp Contact, Set Snmp Location, Show Network
View all HP Integrity Superdome 2 8-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
◦ The default read community name is public. ◦ The default write community name is public. SET SNMP CONTACT • Command: SET SNMP CONTACT "" • Description: Configures the name of the system contact. The default contact is blank. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The must be no more than 20 characters long. Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces. SET SNMP LOCATION • Command: SET SNMP LOCATION "" • Description: Configures the SNMP location of the enclosure. The default location is blank. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The must be no more than 20 characters long. Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces. SHOW NETWORK • Command: SHOW NETWORK • Description: Displays: ◦ DHCP state ◦ Dynamic DNS state ◦ IP address subnet mask ◦ Gateway address ◦ Primary and secondary DNS addresses ◦ MAC address ◦ HTTP and HTTPS server status ◦ SNMP status SET SNMP CONTACT 67