HP Integrity Superdome 2 8-socket HP Integrity Superdome 2 Onboard Administrat - Page 65
Set Oa Gateway, Set Oa Name, Set Oa Uid
View all HP Integrity Superdome 2 8-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
• Access level/Bay level Administrator, OA Operator • Restrictions: The must be in the form where each ### ranges from 0 to 255. SET OA GATEWAY • Command: SET OA GATEWAY [] • Description: ◦ Sets the network default gateway. ◦ This command is used if the system is configured to use a static IP address. ◦ If you do not specify a bay number, the command defaults to the active Onboard Administrator. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The must be in the form where each ### ranges from 0 to 255. SET OA NAME • Command: SET OA NAME [] "" • Description: Sets the Onboard Administrator name. If a bay number is not specified, the command defaults to the active Onboard Administrator. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The Onboard Administrator name is 1 to 32 characters long including all alphanumeric characters and the dash (-). The name cannot begin or end with a dash and cannot be entirely numeric. SET OA UID • Command: SET OA UID [] {ON | OFF} • Description: Sets the Onboard Administrator UID on or off. If you do not specify a bay number, the command defaults to the active Onboard Administrator. SET OA GATEWAY 65