HP Integrity Superdome 2 8-socket HP Integrity Superdome 2 Onboard Administrat - Page 94
Set Date, Set Ntp Primary
View all HP Integrity Superdome 2 8-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
SET DATE • Command: SET DATE MMDDhhmm [[CC]YY][TZ] • Description: Sets the date of the complex with the following definitions: ◦ MM: Month ◦ DD: Day ◦ hh: Hour (24-hour time) ◦ mm: Minute ◦ CC: Century ◦ YY: Year ◦ TZ: Time zone If you leave the time zone variable blank, then the current time zone is left in effect. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: ◦ You must be connected to the monarch OA. ◦ Date and time can only be set if NTP is disabled. ◦ MM is an integer from 01 to 12. ◦ DD is an integer from 01 to 31. ◦ hh is an integer from 00 to 24. ◦ mm is an integer from 00 to 60. ◦ For valid time zones, see "Time zone settings" (page 207). SET NTP PRIMARY • Command: SET NTP PRIMARY • Description: Sets the primary server used for synchronizing time and date using the NTP protocol • Access level/Bay level: OA Administrator, OA Operator • Restrictions: ◦ You must be connected to the monarch OA. ◦ The must be in the form where each ### ranges from 0 to 255. 94 Complex management commands