HP J7988G HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 149
DLC/LLC Protocol Information, Error Messages
UPC - 882780985582
View all HP J7988G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Table 8-11 AppleTalk Configuration Information Message Description STATUS Indicates the current AppleTalk configuration status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that AppleTalk was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is displayed if the print server is not ready. For more information, see Table 8-13 Error Messages on page 140. NAME The name of the printer on the AppleTalk network. A number after the name indicates that there are multiple devices with this name, and this is the Nth instance of the name. ZONE The name of the AppleTalk network zone on which the printer is located. TYPE The type of the printer being advertised on the network. Two types can be displayed. NETWORK NUMBER NODE NUMBER NETWORK NUMBER: Identifies the AppleTalk Network Number on which the HP Jetdirect print server is currently operating. NODE NUMBER: Identifies the AppleTalk Node Number that the print server chose for itself as part of its initialization sequence. NOTE: The AppleTalk phase 2 (P2) parameter is pre-configured on the HP Jetdirect print server. DLC/LLC Protocol Information Information in this section of the Jetdirect configuration page is described in Table 8-12 DLC/LLC Configuration Information on page 139. Table 8-12 DLC/LLC Configuration Information Message Description STATUS: Indicates the current DLC/LLC protocol status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that DLC/LLC was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is displayed if the print server is not ready. For more information, see Table 8-13 Error Messages on page 140. Error Messages Error codes and messages that may appear in the Status sections of the Jetdirect configuration page are described in Table 8-13 Error Messages on page 140. ENWW HP Jetdirect Configuration Page 139