HP J7988G HP Jetdirect Print Server Administrator's Guide (Firmware V.36) - Page 95
Wizard Security Levels continued, Table 4-15 - reviews
UPC - 882780985582
View all HP J7988G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Table 4-15 Wizard Security Levels (continued) Security Level Description as Telnet and SNMP applications. However, some management tools, such as Telnet, use plain-text communications and are not secure. The Administrator Account page is used to enter the administrator password. The administrator password will also be used as the SNMP v1/v2 Set Community Name for SNMP management applications. NOTE: To clear the administrator password, apply blank entries using Custom Security, or refer to the Admin. Account page accessed through the Authorization menu. Enhanced Security (Recommended) The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. This option adds to Basic Security by automatically disabling management protocols that are do not use secure, encrypted communications (such as Telnet and FTP firmware updates, RCFG, SNMP v1/v2c). To change individual protocol settings, see Mgmt. Protocols on page 91. The Administrator Account page is used to enter the administrator password. NOTE: To clear the administrator password, apply blank entries using Custom Security, or refer to the Admin. Account page below. Custom Security SNMP Configuration pages are used to configure specific SNMP settings: ● Enable SNMPv3: (Full-featured print servers only) Enable SNMP v3 and create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP on page 76. ● Enable SNMPv1/v2 read-only access: Enable this option to allow support of current tools that rely on SNMP v1/v2 for device discovery and status. The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. This option allows you to manually set all available security settings supported by your print server. For more information on specific parameters and selections, see the information for the Mgmt. Protocols on page 91 and Authorization on page 86 menu pages. The Administrator Account page is used to enter the administrator password. NOTE: To clear the Administrator Password, enter blank entries, or refer to the Admin. Account page below. The Web Mgmt. page is used for HTTPS (secure HTTP) configuration, including certificates and encryption levels. The Management Tools page allows configuration of management protocols that are not secure (such as RCFG, Telnet and FTP firmware updates). SNMP Configuration pages are used to configure specific SNMP settings: ● Enable SNMPv1/v2: Enable this option to allow management software that use SNMP v1/v2. If selected the SNMPv1/v2 Configuration page is displayed to configure SNMP community names. ● Enable SNMPv3: (Full-featured print servers only) Enable this option to create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP on page 76. ENWW Networking Tab 85