HP LaserJet M2727 HP LaserJet M2727 MFP Series - User Guide - Page 31
Table 2-7, Service menu, Network config menu - troubleshooting
View all HP LaserJet M2727 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Table 2-7 Service menu Menu item Sub-menu item Print T.30 trace Never If error At end of call Now Cleaning mode USB speed Less paper curl Archive print High Full On Off On Off Restore defaults Table 2-8 Network config menu Menu item Sub-menu item TCP/IP config Automatic Manual Link speed Auto crossover ENWW Automatic 10T Full 10T Half 100TX Full 100TX Half On Description Prints or schedules a report that is used to troubleshoot fax transmission issues. Cleans the product when specks or other marks appear on printed output. The cleaning process removes dust and excess toner from the paper path. When selected, the product prompts you to load plain Letter or A4 paper in tray 1. Press OK to begin the cleaning process. Wait until the process completes. Discard the page that prints. Sets the USB speed. When printed pages are consistently curled, this option sets the product to a mode that reduces curl. The default setting is Off. When printing pages that will be stored for a long time, this option sets the product to a mode that reduces toner smearing and dusting. The default setting is Off. Sets all customized settings to the factory default values. Description Automatic automatically configures all the TCP/IP settings via DHCP, BootP or AutoIP. Manual requires you to manually configure the IP address, subnet mask, and default gateway. The control panel prompts you to specify values for each address section. Use the arrow buttons to increase or decrease the value. Press OK to accept the value and move the cursor to the next field. As each address is completed, the product prompts for address confirmation before moving to the next one. After all three addresses are set, the product automatically restarts. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. Sets the auto crossover function. Control-panel menus 19