HP LaserJet Pro 100 Service Manual - Page 47
Control panel, Remove the control panel, CAUTION, Before proceeding, remove the following components
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Control panel CAUTION: ESD sensitive. Before proceeding, remove the following components: ● Right cover. See Right cover on page 16. ● Left cover. See Left cover on page 17. ● Document feeder. See Document feeder on page 18. ● Document feeder hinges. See Document feeder hinges on page 21. ● Top door, rear-top cover, and delivery cover. See Top door, rear-top cover, and delivery cover on page 22. Remove the control panel 1. Disconnect one FFC (callout 1), and then release the FFC from the guide (callout 2). CAUTION: Do not bend or fold the flat flexible cables (FFCs) during removal or installation. Also, do not straighten pre-folds in the FFCs. Figure 1-30 Remove the control panel (1 of 3) 2 1 ENWW Removal and replacement procedures 29
Control panel
CAUTION:
ESD sensitive.
Before proceeding, remove the following components:
●
Right cover. See
Right cover
on page
16
.
●
Left cover. See
Left cover
on page
17
.
●
Document feeder. See
Document feeder
on page
18
.
●
Document feeder hinges. See
Document feeder hinges
on page
21
.
●
Top door, rear-top cover, and delivery cover. See
Top door, rear-top cover, and delivery cover
on page
22
.
Remove the control panel
1.
Disconnect one FFC (callout 1), and then release the FFC from the guide (callout 2).
CAUTION:
Do not bend or fold the flat flexible cables (FFCs) during removal or installation.
Also, do not straighten pre-folds in the FFCs.
Figure 1-30
Remove the control panel (1 of 3)
1
2
ENWW
Removal and replacement procedures
29