HP LaserJet Pro 100 Service Manual - Page 96
Solve problems checklist, Step 1: Test print functionality
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Solve problems checklist Follow these steps when trying to solve a problem with the product. ● Step 1: Test print functionality ● Step 2: Test copy functionality Step 1: Test print functionality 1. Open the Reports menu, and then select Config Report to print the report. 2. If the report does not print, check the following: 3. Make sure that paper is in the tray. 4. Check the control panel for paper jam messages. If the control panel indicates a jam, clear the jam. 5. Make sure that the print cartridge is not empty. 6. Clean the paper pick roller and the separation pad. 7. Replace the paper pick roller or the separation pad. Step 2: Test copy functionality 1. Place the configuration page into the document feeder, adjust the paper guides, and then make a copy. If paper does not feed through the document feeder smoothly, replace the document feeder pick up arm assembly. If this does not improve the issue, replace the document feeder core assembly. 2. Place the configuration page onto the scanner glass, and then make a copy. 3. If the print quality on the copied pages is not acceptable, clean the scanner glass. 78 Chapter 2 Solve problems ENWW