HP LaserJet Pro 100 Service Manual - Page 77
CAUTION, Remove the engine controller assembly 2 of 7
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Remove five screws (callout 1), and then separate the sheet-metal plate (callout 2) and fuser power supply (callout 3) from the product. CAUTION: The sheet-metal plate and fuser power supply assembly is still attached to the product by a FFC connected to the engine controller assembly. Do not attempt to completely remove the assembly. Figure 1-74 Remove the engine controller assembly (2 of 7) 1 2 3 3. Disconnect one FFC (Callout 1), and then remove the sheet-metal plate and fuser power supply assembly. Figure 1-75 Remove the engine controller assembly (3 of 7) 1 ENWW Removal and replacement procedures 59
2.
Remove five screws (callout 1), and then separate the sheet-metal plate (callout 2) and fuser power
supply (callout 3) from the product.
CAUTION:
The sheet-metal plate and fuser power supply assembly is still attached to the
product by a FFC connected to the engine controller assembly. Do not attempt to completely
remove the assembly.
Figure 1-74
Remove the engine controller assembly (2 of 7)
1
3
2
3.
Disconnect one FFC (Callout 1), and then remove the sheet-metal plate and fuser power supply
assembly.
Figure 1-75
Remove the engine controller assembly (3 of 7)
1
ENWW
Removal and replacement procedures
59