HP ML530 ProLiant ML530 Generation 2 Memory Installation Guide - Page 13

Memory CAUTION: Electrostatic discharge can damage electronic components. Be sure you are properly grounded before beginning any installation procedures. The following warnings apply to in-rack operations only: WARNING: Always begin by mounting the heaviest item on the bottom of the rack. Continue to populate the rack from the bottom to the top. WARNING: To reduce the risk of personal injury or equipment damage, always be sure that the rack is adequately stabilized before extending a component outside the rack. A rack may become unstable if more than one component is extended for any reason. Extend only one component at a time. WARNING: To reduce the risk of personal injury or equipment damage, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • The stabilizers are attached to the rack for single-rack installation. • The racks are coupled in multiple-rack installations. WARNING: To reduce the risk of personal injury from hazardous energy or of damage to the equipment when working on energized servers with precautions: • Remove all watches, rings, and any other loose fitting jewelry. • Avoid the use of conductive tools inside the server that could bridge live parts. CAUTION: For Compaq branded Series 7000 racks, you must install highly ventilated rack door inserts to provide proper front-to-back airflow and cooling. CAUTION: Be sure that your rack meets all recommended space and airflow requirements for your server. HP ProLiant ML530 Generation 2 Server Memory Installation Guide 1-3