HP ML530 ProLiant ML530 Generation 2 Memory Installation Guide - Page 31
Installing a Memory Board, the Documentation CD.
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Memory Installing a Memory Board To install a memory board: 1. Align the memory board with the memory slot and memory board guide clips. 2. Slide the memory board into the server (1) and close the ejector levers to seat the memory board firmly (2). 3. Engage the locking switch (3). Figure 1-6: Installing a memory board 4. Power up the server. Refer to Chapter 5, "Installing the Rack Server" or Chapter 6, "Installing the Tower Server," in the setup and installation guide on the Documentation CD. 5. Configure the memory. See "Configuring the Memory" in this chapter. 6. Look at the LEDs on the top of the memory board to be sure that the memory is functioning properly. Table 1-8 describes what the LEDs look like for each memory configuration when the DIMMs and memory board are installed and functioning properly. For more information on LEDs, see "Memory Board LEDs" in this chapter. HP ProLiant ML530 Generation 2 Server Memory Installation Guide 1-21