HP Model 735 hp DDS-DC tape drive user's guide (a1658-90696) - Page 16
Preparing to Install a New DDS-DC Drive
View all HP Model 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introduction Preparing to Install a New DDS-DC Drive The following information describes how to prepare the DDS-DC drive for installation. Tools Required The following tools are needed to install the DDS-DC drive: • #2 Phillips screwdriver • Small needlenose pliers • T10 torx wrench Verifying Kit Contents Verify that the kit contains one of each of the following: • DDS-DC drive (part number 0950-3002) and bezel. • Set of 4 screws (M4x6) • Power adapter cable • SCSI I/O cable • Static strap • HP DDS-DC Tape Drive User's Guide (A1658-90696) NOTICE: If any contents of your kit are missing, contact your sales representative. Operating System Support The HP DDS-DC drive supports HP-UX 9.01 and later. This drive does not require any patches. 1-6
Introduction
1–6
Preparing to Install a New DDS-DC Drive
The following information describes how to prepare the DDS-DC drive for installation.
Tools Required
The following tools are needed to install the DDS-DC drive:
•
#2 Phillips screwdriver
•
Small needlenose pliers
•
T10 torx wrench
Verifying Kit Contents
Verify that the kit contains one of each of the following:
•
DDS-DC drive (part number 0950–3002) and bezel.
•
Set of 4 screws (M4x6)
•
Power adapter cable
•
SCSI I/O cable
•
Static strap
•
HP DDS-DC T
ape Drive User
’
s Guide
(A1658–90696)
NOTICE:
If any contents of your kit are missing, contact your sales
representative.
Operating System Support
The HP DDS-DC drive supports HP-UX 9.01 and later. This drive does not require any
patches.