HP Nc6400 Drives - Windows Vista - Page 10
Replacing the hard drive
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Replacing the hard drive CAUTION To prevent system lockup and loss of information: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. To remove the hard drive: 1. Save your work. 2. Shut down the computer and close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. With the hard drive bay toward you, loosen the 2 hard drive cover screws (1). 8. Lift the hard drive cover away from the computer (2). 9. Loosen the hard drive screw (1) 10. Pull the hard drive tab (2) to the left to disconnect the hard drive. 6 Chapter 3 Hard drives ENWW