HP Officejet 7200 Setup Poster - Page 9
B: Ethernet Wired Network
 |
View all HP Officejet 7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section B: Ethernet (Wired) Network B1 a Connect the Ethernet cable a Remove the yellow plug from the back of the device. b Connect one end of the Ethernet cable to the Ethernet port on the back of the device. c Connect the other end of the Ethernet cable to the hub/router/ switch. If the cable is not long enough, you can purchase a longer cable. Continue to the next page. b c Important: Do not connect the Ethernet cable to a cable modem. You must have a working network. If you already connected the USB cable, do not connect the Ethernet cable. 9 • HP All-in-One
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
B1
9 • HP All-in-One
a
Remove the yellow plug from the back of the device.
b
Connect one end of the Ethernet cable to the Ethernet port on
the back of the device.
c
Connect the other end of the Ethernet cable to the hub/router/
switch. If the cable is not long enough, you can purchase a
longer cable. Continue to the next page.
Important:
Do not connect the Ethernet cable to a cable
modem. You must have a working network. If you already
connected the USB cable, do not connect the Ethernet cable.
Connect the Ethernet cable
c
b
a
Section B: Ethernet (Wired) Network