HP PageWide 377 OfficeJet Pro X and PageWide 300 400 500 series - Shipping Ins - Page 6

Please use the original shipping materials paying special attention to the proper use of

Get HP PageWide 377 PDF manuals and user guides View all HP PageWide 377 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

White Paper c. Remove the ink supplies, if installed, and insert the large orange shipping cap in the space where the ink supplies are normally installed (shown in Figure 4 below). Figure 4 d. Close the interior door, and then close the ink supply door. NOTE: The blue tape should be clearly visible (as shown in Figure 5). Figure 5 Unpacking the unit after shipment a. Open the main ink supply door. Remove the orange shipping cap and insert the ink supplies. b. Open the small interior door that is behind the main ink supply door. Remove any tape from around the area behind the interior door. Unlock and remove the green shipping restraint. IMPORTANT: Before powering-on the unit, you must remove the shipping restraint. If you do not remove the restraint, it could cause an assert error or damage the unit. c. Close the interior door and the main ink supply door, and then power on the unit. 4. Please use the original shipping materials paying special attention to the proper use of the plastic bag, the end-caps, and proper packing of the accessory pieces. Shipping Instructions 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
White Paper
Shipping Instructions
6
c.
Remove the ink supplies, if installed, and insert the large orange shipping cap in
the space where the ink supplies are normally installed (shown in Figure 4 below).
Figure 4
d.
Close the interior door, and then close the ink supply door.
NOTE:
The blue tape should be clearly visible (as shown in Figure 5).
Figure 5
Unpacking the unit after shipment
a.
Open the main ink supply door. Remove the orange shipping cap and insert the
ink supplies.
b.
Open the small interior door that is behind the main ink supply door. Remove any
tape from around the area behind the interior door. Unlock and remove the green
shipping restraint.
IMPORTANT:
Before powering-on the unit, you must remove the shipping
restraint. If you do not remove the restraint, it could cause an assert error or
damage the unit.
c.
Close the interior door and the main ink supply door, and then power on the unit.
4.
Please use the original shipping materials paying special attention to the proper use of the
plastic bag, the end-caps, and proper packing of the accessory pieces.