HP Pavilion 11-n100 Pavilion 11 x360 PC Maintenance and Service Guide - Page 47

Solid-state drive (M.2), Remove the Phillips PM2.0×3.5 screw

Get HP Pavilion 11-n100 PDF manuals and user guides View all HP Pavilion 11-n100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Solid-state drive (M.2) Description 128 GB solid-state drive (SSD), M.2, TLC 128 GB solid-state drive (SSD), M.2 Spare part number 777774-001 794310-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Disconnect the battery. Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board. 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Solid-state drive (M.2)
Description
Spare part number
128 GB solid-state drive (SSD), M.2, TLC
777774-001
128 GB solid-state drive (SSD), M.2
794310-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
5.
Disconnect the battery.
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.5 screw
(1)
that secures the solid-state drive to the system board.
2.
Remove the solid-state drive
(2)
by pulling the drive away from the slot at an angle.
Component replacement procedures
39