HP Pavilion 11-n100 Pavilion 11 x360 PC Maintenance and Service Guide - Page 63
that secure the speakers to the computer., Remove the four Phillips PM2.0×6.0 broadhead screws
View all HP Pavilion 11-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 755738-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 54). Remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the four Phillips PM2.0×6.0 broadhead screws (2) that secure the speakers to the computer. NOTE: Make note of the rubber gaskets (3) that fit around each screw. For installation, make sure the gaskets are properly installed. 3. Remove the speakers (4). Reverse this procedure to install the speakers. Component replacement procedures 55