HP Pavilion dv2000 HP Pavilion dv2000 Notebook PC Maintenance and Service Guid - Page 172
and swing it, Lift the rear edge of the audio/infrared board
View all HP Pavilion dv2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Removal and Replacement Procedures 2. Release the ZIF connector to which the audio/infrared board cable is connected and disconnect the cable 1 from the system board. 3. Remove the two Phillips PM2.5×5.0 screws 2 that secure the audio/infrared board to the computer. 4. Lift the rear edge of the audio/infrared board 3 and swing it forward until the audio connectors disengage from the base enclosure. 5. Remove the audio/infrared board 4. Removing the Audio/Infrared Board Reverse the above procedure to install the audio/infrared board. Maintenance and Service Guide 5-59
Removal and Replacement Procedures
Maintenance and Service Guide
5°59
2. Release the ZIF connector to which the audio/infrared board
cable is connected and disconnect the cable
1
from the
system board.
3.
Remove the two Phillips PM2.5×5.0 screws
2
that secure the
audio/infrared board to the computer.
4. Lift the rear edge of the audio/infrared board
3
and swing it
forward until the audio connectors disengage from the
base enclosure.
5. Remove the audio/infrared board
4
.
Removing the Audio/Infrared Board
Reverse the above procedure to install the audio/infrared board.