HP Pavilion dv2000 HP Pavilion dv2000 Notebook PC Maintenance and Service Guid - Page 176
Remove the Phillips PM2.5×4.0 screw, Remove the num lock light
View all HP Pavilion dv2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Removal and Replacement Procedures 2. Disconnect the USB board cable 1 from the system board. 3. Remove the Phillips PM2.5×4.0 screw 2 that secures the USB board to the computer. 4. Lift the USB board 3 straight up to remove it from the computer. 5. Remove the num lock light 4 from the clip in the base enclosure Removing the USB Board Reverse the above procedure to install the USB board. Maintenance and Service Guide 5-63
Removal and Replacement Procedures
Maintenance and Service Guide
5°63
2. Disconnect the USB board cable
1
from the system board.
3. Remove the Phillips PM2.5×4.0 screw
2
that secures the
USB board to the computer.
4. Lift the USB board
3
straight up to remove it from the
computer.
5. Remove the num lock light
4
from the clip in the base
enclosure
Removing the USB Board
Reverse the above procedure to install the USB board.