HP Photosmart eStation Printer - C510 User Guide - Page 18
Wireless settings for the HP eStation Zeen and the main printer, Add Wi-Fi Network
View all HP Photosmart eStation Printer - C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Online Topics Chapter 1 Wireless settings for the HP eStation Zeen and the main printer Touch Wireless Settings on the Display Wireless bar or Printer Wireless bar on the System Dashboard screen. Use the wireless settings to connect the HP eStation Zeen and the main printer to a wireless network, and to check the connection status. If the HP eStation Zeen is removed from the main printer, they may be connected to different wireless networks. Use the instructions below to re-establish a wireless network connection or add a new wireless network. Check the wireless connection status of the HP eStation Zeen Look at the line under the Display Wireless bar of the System Dashboard screen. If the HP eStation Zeen is connected to a network, the network name is displayed on this line; if not connected to a network, that status is shown, instead. You can touch Wireless Settings to open the Wireless Settings menu. Check the wireless connection status of the main printer The HP eStation Zeen must be either docked or in range of the wireless network of the main printer in order to check the connection status of the main printer. Look at the line under the Printer Wireless bar of the System Dashboard screen. If the main printer is connected to a network, the network name is displayed on this line; if not connected to a network, that status is shown, instead. You can touch Wireless Settings to open the Wireless Settings menu. Scan for available wireless networks Touch Scan at the bottom of the Wireless Settings screen. Available networks are listed under the Wi-Fi Networks area of the screen. Secured networks are indicated with a padlock symbol. Add a new wireless network To add a new wireless network: 1. Touch Add Wi-Fi Network at the bottom of the Wireless Settings screen. 2. Enter the network name (SSID). 3. Select a Security type from the drop-down menu before entering the wireless password. 4. Enter a security key, if applicable. 5. Touch Save to continue. To add a WPS network: 1. Touch Add WPS Network on the Wireless Settings screen. 2. Select an SSID from the Select SSID drop-down list. 3. Select the WPS method from the WPS Method drop-down list. 4. Enter the network PIN. 5. Touch Start to add the new network. Connect to an available wireless network To connect to a network listed in the Wi-Fi Networks area of the Wireless Settings screen, touch the name of the network. Once connected, the status area under the network name shows Connected. If the network is not in range, that status is indicated in the status area instead. TIP: If you are out of range of any wireless networks and want to connect to a network as soon as you are in range of one, touch the checkbox in the Network Notifications area of the Wireless Settings screen to display the check mark. When a network is available, the following symbol is displayed in the Notifications bar. 16 Online Topics