HP ProLiant 1500 ProLiant Server Troubleshooting Guide - Page 247
Reports Valid Data, Found in Array
View all HP ProLiant 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
POST Error Messages Table C-13: 1700 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1790-Disk X Configuration Error None Hard drive error or wrong drive type detected. 1790-Disk X Configuration Error None Hard drive error or wrong drive type detected. 1791-Disk 1 Error None Hard drive error or wrong drive type detected. 1792-Drive Array Reports Valid Data Found in Array Accelerator. Data will automatically be written to drive array. None 1792-Secondary Disk Controller Failure 1793-Drive Array - Array Accelerator Battery Depleted - Data Lost. (Error message 1794 also displays.) None None This indicates that while the system was in use, power was interrupted while data was in the array accelerator memory. Power was then restored within several days, and the data in the array accelerator was flushed to the drive array. Part of the IDE drive electronics has failed. This indicates that while the system was in use, power was interrupted while data was in the array accelerator memory. Array accelerator batteries failed. Data in array accelerator has been lost. Action Run the server setup utility and Diagnostics and correct. Replace failed assembly as indicated. Run the server setup utility and Diagnostics and correct. Replace failed assembly as indicated. Run the server setup utility and Diagnostics and correct. Replace failed assembly as indicated. No action necessary; no data has been lost. Perform orderly system shutdowns to avoid data remaining in the array accelerator. Run Diagnostics and replace failed assembly as indicated. Power was not restored within enough time. Perform orderly system shutdowns to avoid data remaining in the array accelerator. continued HP Servers Troubleshooting Guide C-67