HP ProLiant DL160 HP ProLiant DL160 Generation 5 Server Software Configuration - Page 15
Table, Field, Description, Options, IDE Detect Time Out
View all HP ProLiant DL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Table 6 IDE Configuration submenu fields Field Description Options Hard Disk Write Protect Set this value to allow the hard disk drive to be used normally. Read, write, and erase functions can be performed to the hard disk drive. This is the default setting. Disabled Set this value to prevent the hard disk drive from being erased. Enabled IDE Detect Time Out (Sec) This value is the best setting to use if the onboard IDE controllers are 0 set to a specific IDE disk drive in the BIOS. Set this value to stop the setup from searching the IDE bus for IDE 5 disk drives in 5 seconds. Set this value to stop the setup from searching the IDE bus for IDE 10 disk drives in 10 seconds. Set this value to stop the setup from searching the IDE bus for IDE 15 disk drives in 15 seconds. Set this value to stop the setup from searching the IDE bus for IDE 20 disk drives in 20 seconds. Set this value to stop the setup from searching the IDE bus for IDE 25 disk drives in 25 seconds. Set this value to stop the setup from searching the IDE bus for IDE 30 disk drives in 30 seconds. 35 is the default value. It is the recommended setting when all IDE 35 connectors are set to AUTO in the setup setting. System BIOS configuration 15