HP ProLiant DL160 HP ProLiant DL160 Generation 5 Server Software Configuration - Page 33

BIOS Summary Display screen, Boot Options, Enabled, Pause/Break

Get HP ProLiant DL160 - G5 Server PDF manuals and user guides View all HP ProLiant DL160 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

BIOS Summary Display screen The BIOS Summary Displays basic and important information about the current server configuration and is necessary for troubleshooting and may be required when asking for technical support. This information includes: • Size of the system • Serial port base I/O address • Available hard drives and expansion boards • PCI information It is recommended that you check this screen during the initial system setup and each time you install, remove, or upgrade accessories. You first need to enable the display of the diagnostic screen during bootup. Follow the steps below. To view the boot-time diagnostic screen: 1. In the Main menu screen, select Boot Options. 2. Select the BIOS Summary Screen field. 3. Press the plus (+) or minus (-) key to set the field to Enabled. 4. Press F10 to save the changes you made and close the Setup Utility. 5. Reboot the server. The BIOS Summary Screen is displayed briefly at the end of POST. Figure 27 BIOS Summary Screen 6. Press the Pause/Break key to continue displaying the screen until another key is pressed. 7. Press any key to continue with the system bootup. System BIOS configuration 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
System BIOS configuration 33
BIOS Summary Display screen
The BIOS Summary Displays basic and important information about the current server configuration
and is necessary for troubleshooting and may be required when asking for technical support. This
information includes:
•
Size of the system
•
Serial port base I/O address
•
Available hard drives and expansion boards
•
PCI information
It is recommended that you check this screen during the initial system setup and each time you install,
remove, or upgrade accessories.
You first need to enable the display of the diagnostic screen during bootup. Follow the steps below.
To view the boot-time diagnostic screen:
1.
In the Main menu screen, select
Boot Options
.
2.
Select the
BIOS Summary Screen
field.
3.
Press the plus (+) or minus (-) key to set the field to
Enabled
.
4.
Press
F10
to save the changes you made and close the Setup Utility.
5.
Reboot the server.
The BIOS Summary Screen is displayed briefly at the end of
POST
.
Figure 27
BIOS Summary Screen
6.
Press the
Pause/Break
key to continue displaying the screen until another key is pressed.
7.
Press any key to continue with the system bootup.