HP Q7518A HP Color LaserJet 4730mfp - User Guide - Page 291
Color Supply Out, Replace Transfer Kit
View all HP Q7518A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Control panel message REPLACE SUPPLIES To continue touch "OK". The supplies gauge will display the consumption levels of print cartridges. REPLACE SUPPLIES Using black only Press Status alternates with REPLACE TRANSFER KIT For help press REPLACE TRANSFER KIT For help press alternates with REPLACE TRANSFER KIT To continue touch "OK". Description Recommended action Multiple supplies are at the end of their useful life and the REPLACE SUPPLIES setting in 1. the SYSTEM SETUP menu is set to STOP AT LOW. 2. Touch SUPPLIES STATUS menu. Scroll to the specific supply that has a problem. 3. Touch to view help for the supply. 4. Use the scroll bar to step through the instructions. 5. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. AUTOCONTINUE BLACK is set in the COLOR SUPPLY OUT menu and a color print cartridge is Out. Printing can continue in black only. Replace the indicated print cartridge. The transfer unit is at end of life. Printing can 1. continue but print quality might be reduced. 2. Open the top and side covers. Lower the transfer unit by pulling the green handle at the top of the unit downward. 3. Depress the small blue latches located on either side of the bottom of the transfer unit and lift the unit out of the MFP. 4. Install the new transfer unit. 5. Close the front and top covers. 6. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The transfer unit is nearing the end of its 1. useful life and the REPLACE SUPPLIES setting in the SYSTEM SETUP menu is set to 2. STOP AT LOW. 3. Order the transfer kit. To continue printing, touch OK. To replace the transfer kit, perform the following steps: ● Open the top and side covers. ● Lower the transfer unit by pulling the green handle at the top of the unit downward. ● Depress the small blue latches located on either side of the bottom of the transfer unit and lift the unit out of the MFP. ENWW Control panel messages 271