HP Q7518A HP Color LaserJet 4730mfp - User Guide - Page 78
Embedded Jetdirect submenu, CON DEVICE, JETDIRECT
View all HP Q7518A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Item FIND SEND GATEWAYS SMTP GATEWAY LDAP GATEWAY JETDIRECT TEST SEND GATEWAYS Values No value to select No value to select No value to select See submenu below. No value to select Explanation This item searches the network for both SMTP and LDAP gateways that can be used to send e-mail. This is the IP address of the SMTP Gateway that is used for sending e-mail. This is the IP address of the LDAP Gateway that is used for looking up email address information. JETDIRECT allows you to configure network settings. Tests the configured gateways to ensure that they are functional. Embedded Jetdirect submenu To gain access to this menu, touch CONFIGURE DEVICE, and then touch I/O and then touch JETDIRECT. Item TCP/IP Options ENABLE HOST NAME Values ON OFF CONFIG METHOD BOOTP DHCP* AUTO IP MANUAL DHCP RELEASE YES NO* Explanation ON: (default) Enable the TCP/IP protocol. OFF: Disable the TCP/IP protocol. An alphanumeric string, up to 32 characters, that is used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Select BOOTP (Bootstrap Protocol) for automatic configuration from a BootP server. Select DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. Select AUTO IP for automatic linklocal IP addressing. An address in the form 169.254.x.x will be automatically assigned. Use the MANUAL settings menu to configure TCP/IP parameters. If DHCP is used and a DHCP lease exists, selecting NO saves the current lease. Selecting YES releases the current DHCP lease and the leased IP address. 58 Chapter 2 Using the control panel ENWW