HP ScanJet Pro 3500 User Guide - Page 36
Clean the Automatic Document Feeder scanning strips, Introduction, Clean the scanning strips
View all HP ScanJet Pro 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2. Use a clean, lint-free cloth moistened with water or spray the glass cleaner on a clean, lint-free cloth, and then thoroughly clean the flatbed scanner glass. CAUTION: Do not spray the glass cleaner directly on the scanner glass as this might cause permanent damage. 3. Dry the scanner glass with a dry, soft, lint-free cloth. NOTE: Make sure to dry the scanner glass completely. 4. Turn on the scanner. The scanner is now ready to use. Clean the Automatic Document Feeder scanning strips ● Introduction ● Clean the scanning strips Introduction Clean both of the scanning strips periodically, including any time a scanned image has streaks. Clean the scanning strips To clean the scanning strip components, follow these steps: 1. Press the Power button to turn off the scanner, and then disconnect the USB cable and power supply from the scanner. 2. Lift up the document feeder. 28 Chapter 3 Care and maintenance