HP Scitex LX850 HP Scitex LX850 & LX820 Printers: Site Preparation Guide - - Page 17
Floor surface, Lighting, Designing the Print Production Area, Safety installations
View all HP Scitex LX850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Site preparation LX820 & LX850 A 5.718 m (225.11 in) B 3.650 m (143.69 in) C 1.485 m (58.46 in) D 762 mm (30 in) E 451 mm (17.75 in) F 782 mm (30.79 in) Floor surface The floor surface should have the following characteristics: ● Solid, smooth, and level ● No holes or indentations ● Static-free surface (no carpet) ● Easy to clean ● Durable ● Free from strong vibrations Lighting Whenever your printer is in operation, the print production area should be well lit to provide the operator with optimal conditions for checking the color and alignment during print production. If there is not enough natural light, artificial lighting will be required. Designing the Print Production Area Safety installations Fire fighting equipment You must provide two fire extinguishers for the site. Make sure the extinguishers are placed where they are easily accessible in case of fire. ● A fire extinguisher certified for electrical fires must be in the print production area. ● A fire extinguisher must be placed in the substrate storage area, due to the large amount of solid combustibles (substrates). Emergency exits and first aid stations should also be considered. ENWW Designing the Print Production Area 13