HP Smart Tank Wireless 450 User Guide - Page 24
Ink system maintenance, Number of copies, Error, Resume
View all HP Smart Tank Wireless 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Cause The printer is in an error state. Solution Reset the printer. 1. Turn off the printer. 2. Unplug the power cord. 3. Wait a minute, and then plug the power cord back in. 4. Turn on the printer. If the problem persists, contact HP. ● The Number of copies icon is alternating between the letter E and the number 7. Cause The printer has reached the maximum number of primes allowed. Solution Contact HP support for help. Ink system maintenance The Number of copies icon is alternating between the letter E and the number 9. At the same time, the Error icon and the Resume light are blinking. Cause Ink system maintenance is required. Solution Do the following to clear the error: ● Check the ink tanks and add more ink if needed. For more information, see Refill ink tanks on page 60. ● Open the printhead access door completely, and then close it to remove ink buildup in the printer. NOTE: Do not open the printhead latch. ENWW Control panel lights and display icons status 17