HP Smart Tank Wireless 450 User Guide - Page 75
Connect your printer to a wireless network with a router
View all HP Smart Tank Wireless 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Connect your printer to a wireless network with a router TIP: To print a wireless quick start guide, press the Information button ( ) for three seconds. ● Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS) ● Connect your printer to a wireless network using HP printer software Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS) Before connecting your printer to a wireless network using WPS, make sure you have the following: ● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point. NOTE: The printer only supports connections using 2.4GHz. ● A computer that is already connected to the wireless network that you want to use to connect your printer. Be sure you have installed the HP printer software on the computer. If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your router has a push button, follow the PIN method. To use the Push Button Configuration (PBC) method 1. Press and hold the Wireless button ( ) on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking. 2. Press the WPS button on your router. NOTE: The product begins a timer for approximately two minutes while a wireless connection is established. To use the PIN method 1. Press the Wireless button ( ) and Information button ( configuration page, and then locate a WPS PIN. ) at the same time to print the network The WPS PIN is printed at the top of the printed information page. 2. Press and hold the Wireless button ( The wireless light starts blinking. ) from the printer control panel for more than three seconds. 3. Open the configuration utility or software for the wireless router or wireless access point, and then enter the WPS PIN. 68 Chapter 7 Connect your printer ENWW