HP StorageWorks 1606 Brocade Fabric OS MIB Reference v6.3.0 (53-1001339-01, Ju - Page 179

swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 5 • online (1) User frames can be passed. • offline (2) No user frames can be passed. • testing (3) No user frames can be passed. • faulty (4) No user frames can be passed. For Fabric OS v3.x: The 3 (testing) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, swFCPortAdmStatus is then changed to either the 1 (online) or 3 (testing) states or remains in the 2 (offline) state. For Fabric OS v4.x: The 3 (testing) state is not supported. swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Values Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports. • loopback (3) The port might transmit frames through an internal path to verify the health of the transmitter and receiver path. swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 Indicates the media transmitter type of the port. Values Possible values are: • unknown (1) Cannot determine the port driver. • lw (2) Long wave laser. • sw (3) Short wave laser. • ld (4) Long wave LED. • cu (5) Copper (electrical). swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 Counts the number of Fibre Channel words that the port has transmitted. You can convert words to bytes by multiplying this value by 4. swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 Counts the number of Fibre Channel words that the port has received. You can convert words to bytes by multiplying this value by 4. Fabric OS MIB Reference 161 53-1001339-01