HP StorageWorks 1606 Brocade Fabric OS MIB Reference v6.3.0 (53-1001339-01, Ju - Page 239

connUnitDomainId 1.3.6.1.3.94.1.6.1.11 8 "http://{a.b.c.d}" where {a.b.c.d} is the IP address of the switch if Web Tools license is available. "" (null) where "" is the IP address of the switch if Web Tools license is not available. connUnitDomainId 1.3.6.1.3.94.1.6.1.11 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as "11 11 11". A Brocade Access Gateway does not have a domain ID. connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 A value of "yes" means this is the proxy master unit for a set of managed units. Values Possible values are: • unknown (1) • no (2) • yes (3) This could be the only unit with a management card in it for a set of units. A standalone unit should return "yes" for this object. Set to 3 (yes). connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 Values Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, it returns "unknown." If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not a Fibre Channel switch, the value is set to 1 (unknown). Possible values are: • unknown (1) • no (2) • yes (3) connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable. Refer to Table 14 on page 150 for specific sensor counts on the various switches. Fabric OS MIB Reference 221 53-1001339-01