HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.3.2b release notes (5697-007 - Page 15

When FICON host sends PLOGI directly to a device immediately after registering with the Management Server, PLOGI may be rejected because the routing tables have not been established. Fixed in Fabric OS 5.3.1. Incorrect GID FT response from Name Server caused host with multiple HBAs to log errors during HBA IOP reset. When host does its GID FT request, it gets a response for the other HBA though that HBA didn't register for FC4 type. Subsequent PLOGI, PRLI sequence to the non- FC4 type HBA is rejected and an error logged on the host. Fixed in Fabric OS 5.3.1. Automatic Fabric Configuration Server (FCS) policy distribution will not work properly on a future release with current Fabric OS 5.x in the fabric. Fixed in Fabric OS 5.3.1. Port scn removes logical paths from wrong port, resulting in some paths not coming online. Fixed in Fabric OS 5.3.1. If CALD restarts, it can no longer provide CAL cache data on EM, leading to possible SMI agent experiencing a reconnect issue. Fixed in Fabric OS 5.3.1. When a third-party system sends PLOGI/PRLI frames with its DID as a broadcast format, the 2/128 forwards the frame as a broadcast frame to all switch ports, causing other devices in the fabric to malfunction and overextend the switch CPU. This issue only affects 2/128. Fixed in Fabric OS 5.3.1. Occasional kernel panic occurs during reboot. Fixed in Fabric OS 5.3.1. Fabric OS 5.3.1a fixes Table 4 lists defects closed in the Fabric OS 5.3.1a firmware release. Table 4 Fabric OS 5.3.1a closed defects Closed defect summary Solution F_Port link initialization failure caused by the switch not responding to NOS with OLS (continues to send idles). Fixed in Fabric OS 5.3.1a. When downgrading from 6.0.0x to Fabric OS 5.3.0c, then 5.2.1b, then 5.0.5a, the switch can get into an endless reboot causing file system errors to be reported. Fixed in Fabric OS 5.3.1a If your switch is not upgraded to 5.3.1a, the workaround is to issue firmwaredownload with the -sf option: firmwaredownload -sf Use default answers so that firmwaredownload does not reboot after download, perform the following steps: mount -oremount,ro /mntumount /mnt hareboot FR4-18i blade is faulted during operation with internal FCIP-5031 RASLog and external EM-1034 RASLog. Fixed in Fabric OS 5.3.1a. The zoneadmin feature in WebTools does not display the new ports after adding a new blade. Fixed in Fabric OS 5.3.1a. HP StorageWorks Fabric OS 5.3.2b release notes 15