HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.3.2b release notes (5697-007 - Page 18

Too many FW-5002 messages causes a FFDC to be generated. nsd daemon is running out of memory. Switch experienced out-of-memory condition in interopmode with nsd being killed. WebTools does not work well in NAT environment. After security network scan of switch, IPADMd is no longer running. Speed negotiation fails on 4-Gb quadrate, long-wave 4-Km SFPs. Fixed in Fabric OS 5.3.2. Fixed in Fabric OS 5.3.2. Fixed in Fabric OS 5.3.2. Fixed in Fabric OS 5.3.2. Fixed in Fabric OS 5.3.2. Fixed in Fabric OS 5.3.2. Workaround: Reset SFPs to avoid qualrate mode. 4-Gb switch running at fixed 2-Gb speed may not respond to FLOGI from HBA using auto-speed negotiation. Fixed in Fabric OS 5.3.2. WebTools zone admin alias displays duplicate PWWN on 48-port blade card. Fixed in Fabric OS 5.3.2. Fabric OS 5.3.0c WebTools zone sort by member of alias and member of zone is out of order. Fixed in Fabric OS 5.3.2. Fabric OS 5.3.2a fixes Table 7 lists the defects in the Fabric OS 5.3.2a firmware release. Table 7 Fabric OS 5.3.2a closed defects Closed defect summary Solution A switch panic occurs due to a memory leak. This causes an Out of memory trigger during hafailover/hareboot when querying connUnitPortFCId in AG (Access Gateway) mode and when querying FcFeModuleName. Fixed in Fabric OS 5.3.2a. Workaround prior to upgrade: Avoid this issue by not querying connUnitPortFCId in AG mode or FcFeModuleName MIB If a second FDISC is received before the switch responds to the first FDISC between the same pair of devices, the Access Gateway daemon panics, triggering a reboot. Fixed in Fabric OS 5.3.2a. Access Gateway N_Port failover does not work if the HBA is brought online and the mapped N_Port is offline. In this case, the HBA is not sent to an available N_Port so that it can do a fabric login (FLOGI); instead, the HBA waits for its mapped N_Port to become active. Fixed in Fabric OS 5.3.2a. 18