HP StorageWorks 2/32 Brocade Fabric OS Documentation Addendum - Supporting Fab - Page 27
Table 2-1, Field, Default, Range, con Con Command Fabric Parameters, Domain
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
configure 1 The Switch Fabric Settings are as follows: Table 2-1 Configure Command Fabric Parameters Field Type Default Table 1-1 Domain number 1 R_A_TOV number 10000 E_D_TOV number 2000 WAN_TOV number 0 MAX_HOPS number 7 Data Field Size number 2112 Sequence Level Switching boolean 0 Disable Device Probing boolean 0 Suppress Class F Traffic boolean 0 Switch PID Format number 1 Per-frame Route Priority boolean 0 Long Distance Fabric boolean 0 BB Credit number 16 Insistent Domain ID Mode boolean no BALDE_FAULT_ON_HWERRMSK Hex 0x0 Range varies E_D_TOV * 2 to 120000 1000 to R_A_TOV / 2 0 to R_A_TOV / 4 7 to 19 256 to 2112 0 or 1 0 or 1 0 or 1 1 to 2 0 or 1 0 or 1 1 to 27 yes/no 0x0-0xffff Descriptions of the switch fabric setting fields are as follows: Domain The domain number uniquely identifies the switch in a fabric. This value is automatically assigned by the fabric. The range of valid values varies depending on the switch model and other system parameter settings. R_A_TOV The resource allocation time out value (R_A_TOV) is displayed in milliseconds. This variable works with the variable E_D_TOV to determine switch actions when presented with an error condition. Allocated circuit resources with detected errors are not released until the time value has expired. If the condition is resolved prior to the time out, the internal time-out clock resets and waits for the next error condition. E_D_TOV Error detect time out value (E_D_TOV) is displayed in milliseconds. This timer is used to flag a potential error condition when an expected response is not received (an acknowledgment or reply in response to packet receipt, for example) within the set time limit. If the time for an expected response exceeds the set value, then an error condition occurs. WAN_TOV Wide area network time-out value (WAN_TOV) displays in milliseconds. This timer is the maximum frame time out value for a WAN, if any, interconnecting the Fibre Channel islands. MAX_HOPS Maximum hops (MAX_HOPS) is an integer that denotes the upper limit on the number of hops a frame might have to traverse to reach any destination port from any source port across the fabric. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-13