HP StorageWorks 2/32 Brocade Fabric OS Documentation Addendum - Supporting Fab - Page 45
ipAddrSet, the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ipAddrSet 1 ipAddrSet Synopsis Description Sets the IP address details for a switch or control processor (CP). ipaddrset [-cp number][-sw number] Use this command to set the IP addresses on the switch or CP. The command's usage varies depending on whether it is being used on a chassis-based system or non chassis-based switch On a chassis-based system, if no option is provided, the command prints the usage. To set the CP IP address use -cp, to set the switch IP address use -sw. When setting the switch, the command prompts for the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask. When setting the CP, the command prompts for the Ethernet IP address, Ethernet subnetmask, host name, and Gateway IP address. Valid switch and CP numbers depend on the platform from which the command is being run. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands on a chassis-based system: -cp number Valid options include: 0 Sets the Ethernet IP address, Ethernet subnetmask, gateway IP address, and host name of CP0. 1 Sets the Ethernet IP address, Ethernet subnetmask, gateway IP address, and host name of CP1. -sw number Valid options include: 0 Sets the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask of logical switch 0. 1 Sets the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel Subnetmask of logical switch 1. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-31