HP StorageWorks 2/32 Brocade Fabric OS Documentation Addendum - Supporting Fab - Page 77
AG-1003, Message, Probable, Cause, Recommended, Action, Severity
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
AG-1003 2 AG-1003 Message , [AG-1003], ,, WARNING, , Not able to fail over N_Port . Fail over across different fabric is not supported. Probable Cause Recommended Action Severity Indicates that an F_Port could not be failed over to another N_Port because no other N_Ports were connected to the same fabric as N_Port that went offline. Connect two or more N_Ports to the same fabric and then enable failover on these N_Ports using the ag --failoverenable command. WARNING AG-1004 Message , [AUTH-1004], ,, ERROR, , Invalid response to fabric login (FLOGI) request from the fabric for N_Port . Probable Cause Recommended Action Severity Indicates that the fabric sent an invalid response to FLOGI ELS of the specified N_Port. Verify the fabric switch's configuration. If the message persists, run supportFtp to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AG-1005 Message , [AUTH-1005], ,, WARNING, , FDISC response dropped because F_Port is offline. Probable Cause Recommended Action Severity Indicates that the F_Port that connects to the host is offline. Verify the configuration of the host connected to the specified F_Port. WARNING Fabric OS Documentation Addendum 2-3 Publication Number: 53-1000429-01-HP